Round Mirror Tables

3. When sawing the plain board, the operator should first read the board cutting comprehensively Processing drawings and related supporting size blanking tables are processed.5mm. b. White billet grinding quality requirements: there should be no burrs on the surface of the parts, smooth edges, no unevenness, no chamfering at the coers of the board surface, it is advisable not to scrape the hands, and there should be no improper degeneration after polishing. Keep it clean and the edges of the paint line are neat. Six, the quality requirements of the packaging section 1. The allowable tolerance of the non-joint bending position is u0026plusmn; 1. Its unique shape is well received by consumers. Packaging quality requirements: a. Quality requirements for painting section 1. Requirements for sticker parts: After polishing, the parts should be smooth and bright, sand-permeable, inorganic shadow sand marks, no sand penetrating the bottom, or scratches. The sawn boards should be stacked in a dry place. The position deviation of the upper and lower plates after cold pressing is less than 1. After polishing, they must be cleaned before they can be placed back into the iron frame. The workpiece route is as follows: A: Cutting-pressure plate (fixing)-edge cleaning (slotting)-gong machine-ashing-sticker-primer-dry sand-top coat-installation B: The processing route of the processing board (veneer panel) is specifically: cutting-pressing-edge cleaning (opening-gong machine-edge banding-trimming-installation. The outside of the stitch is basically the same as the plane, and there is no paint abrasion, and there is no need to keepcoffee tables the sprayed part. Process requirements for paper pressing: the processed plates and paper must be firmly and smoothly pasted. Transparent oil spraying quality requirements: The surface is sprayed evenly, smoothly, without sagging, shrinkage, bulging, and no spraying parts are required. (1) For the veneer wood-based panels used by the pan,coffee tables ...ادامه مطلب