The components must be installed firmly

3. When sawing the plain board, the operator should first read the board cutting comprehensively Processing drawings and related supporting size blanking tables are processed.5mm. b. White billet grinding quality requirements: there should be no burrs on the surface of the parts, smooth edges, no unevenness, no chamfering at the coers of the board surface, it is advisable not to scrape the hands, and there should be no improper degeneration after polishing. Keep it clean and the edges of the paint line are neat. Six, the quality requirements of the packaging section 1. The allowable tolerance of the non-joint bending position is u0026plusmn; 1. Its unique shape is well received by consumers.

Packaging quality requirements: a. Quality requirements for painting section 1. Requirements for sticker parts: After polishing, the parts should be smooth and bright, sand-permeable, inorganic shadow sand marks, no sand penetrating the bottom, or scratches. The sawn boards should be stacked in a dry place. The position deviation of the upper and lower plates after cold pressing is less than 1. After polishing, they must be cleaned before they can be placed back into the iron frame. The workpiece route is as follows: A: Cutting-pressure plate (fixing)-edge cleaning (slotting)-gong machine-ashing-sticker-primer-dry sand-top coat-installation B: The processing route of the processing board (veneer panel) is specifically: cutting-pressing-edge cleaning (opening-gong machine-edge banding-trimming-installation.

The outside of the stitch is basically the same as the plane, and there is no paint abrasion, and there is no need to keepcoffee tables the sprayed part. Process requirements for paper pressing: the processed plates and paper must be firmly and smoothly pasted. Transparent oil spraying quality requirements: The surface is sprayed evenly, smoothly, without sagging, shrinkage, bulging, and no spraying parts are required. (1) For the veneer wood-based panels used by the panel fuiture manufacturer for secondary veneer processing by this unit, the length processing allowance of the plain board parts is generally set at 10-15mm; the width processing allowance is 8～ 12mm (2) When large-format plain boards are being sawed, they should rise and fall flat. Hope this article can help you understand panel fuiture. The processing surface must be smooth, with smooth lines, and natural transition., and the remaining wax must be wiped off after polishing.

The quality requirements of the press: a. Substrate for panel fuiture processing u0026mdash;u0026mdash; wood-based panel To process the MDF board of the base material of panel fuiture (hereinafter referred to as man-made board), first of all, it must meet the quality standards. Second, the production process of panel fuiture In order to facilitate the operation, the production of panel fuiture is usually divided into two lines, A and B. 3. The quality requirements of dry sand: the polished paint surface is smooth, without pinholes, nail holes, not sanding through the paint coating, the sand road must be straight and thin, without groove marks, sand marks from the sanding machine, if any The coers, wiring, and arcs of the sand-piercing paint coating must be primed and polished.

Manual installation quality requirements: The components must be installed firmly, and the board surface must be kept clean. Its unique shape is well received by consumers. 4. Let me take you to lea about the six process flow of panel fuiture, so that you want to have a reference when you understand panel fuiture. 2. The coating surface must not have pinholes, granules, paint residue, uneven spraying, no sag, no shrinkage, bulging, bubbling, etc. Hope this article can help you understand panel fuiture., and the surface of the parts is clean, free of debris, and no sawdust